" These came from John Pignatelli, one of the modelers who built the 44 1/2 foot movie model. I will include a set of shell plate plans reduced to 1/192nd scale showing proper port hole placement ( starboard and port ) and sizes for the Titanic. These plans came from John and are a copy of the original used for the movie model. The corrections have been made by Ken Marschall himself. It has his name on them with the date he revised the plans. There are hand written sizes for the portholes etc. I will only let these plans go with the set as they were part of the price when I bought them. The shell plating plans are from the water line up only. Also included is a poor copy of Olympics general arrangements ( not the same as seen in Anatomy ) and a crappy copy of the Titanic rigging plan with hard to read corrections to the port holes, both scaled down to 1/192. These plans were part of the price so I don't believe I'm violating anything here. Again, I will only sell these plans with the hull, rudder and funnels just as you were to buy them from John himself. The hull has rough Olympic port holes scribed in the sides that would need to be filled and redrilled to be accurate with Titanic. There are horizontal lines representing shell plates on the sides of the hull but they are inaccurate and have very little sheer. The well deck cutouts will have to be carved to make them correct. ( these are problems John faced when confronted with casting the hull from fiberglass resin and the molding process) The boss arms and center prop areas are designed to be fitted for R/C use and are not completely accurate. The stem also needs to be added at the bow which will bring the length to nearly 1/192. The funnels and rudder appear fine though I have not measured them for accuracy."

The photos...

For information on how to purchace this hull, or if you have any questions about it, please E-MAIL BRUCE BEVERIDGE